Deltech Logo
How can we help you?
imageimageimage
Click to enlarge
preview
preview
preview
Back to the product list

RP Series - Heated Purge Desiccant Dryers

DRYERS - COMPRESSED AIR / DESICCANT COMPRESSED AIR DRYERS

Deltech RP Series Dryers Slash Purge Air Energy Costs

Deltech RP Series dryers will produce the design dew point while operating continuously at maximum rated flow (100% duty cycle) at CAGI ADF 200 inlet standards of 100°F inlet temperature and 100% relative humidity at 100 psig.

Standard RP Series (Heated Blower Purge) Desiccant Compressed Air Dryers: -4°F to -40°F Pressure Dew Points
Designed for applications that were previously forced to accept a 40°F pressure dew point when simple protection against seasonal freezing is the issue. The standard design delivers ISO 8573.1 dew points between Class 2 and Class 3 automatically. Class 2 (40°F) dew points protect against freezing during low ambient conditions and Class 3 (4°F) dew points keep your air system bone dry during the heat of summer. Applications that require Class 2 (-40°F) dew points year round simply need to select the Free-Air (FA) Supercharger option package

Energy Management System
The EMS uses rugged temperature- & humidity-sensing technology that does not require calibration. Constant desiccant bed monitoring ensures stable dew point control. Algorithm-based A3 PurgeTechnology™ controls precisely engage the FA Supercharger when needed to manage the bed regeneration cycles and boost the airflow through the tower. Compressed purge air volume is reduced, further optimizing energy conservation.

An RP Series dryer with an EMS package may enable the use of a smaller air compressor. Total system efficiency would then be superior due to the linear energy-saving potential of the dryer. Purge air savings of up to 15% are possible in direct proportion to demand when compared to typical heatless designs. Consistent -40°F pressure dew points and fast returns-on-investment are automatic year round.

MODELINLET FLOW
@ 100 PSI
(6.7 BARG)
HEATER
RATED
OUTPUT
FULL LOAD
(AVERAGE)
INLET/OUTLET
CONNECTIONS
HF SERIES
PREFILTER
HTA SERIES
AFTERFILTER
SCFMNM3/HKWKWIN(RECOMMENDED)
HPD3003005104.52.01 1/2" NPTHF-36-12-DGLHTA400
HPD4004006806.02.71 1/2" NPTHF5-40-16-DGHTA400
HPD5005008507.03.32" NPTHF5-44-20-DGHTA600
HBP6006001,0198.04.02" NPTHF5-44-20-DGHTA600
HBP7507501,27410.05.03" FLGHF5-48-20-DGHTA1200
HBP9009001,52912.06.03" FLGHF5-54-24-GHTA1200
HBP105010501,78414.07.03" FLGHF5-56-24-GHTA1200
HBP130013002,20917.08.73" FLGHF5-60-24-GHTA1800
HBP150015002,54919.010.03" FLGHF5-60-24-GHTA1800
HBP180018003,05823.012.03" FLGHF5-60-24-GHTA1800
HBP220022003,73828.014.74" FLGHF5-64-4F-GHTA2400
HBP260026004,41733.017.44" FLGHF5-68-4F-GHTA3000
HBP320032005,43740.021.44" FLGHF5-72-6F-GHTA4800

1 Performance data per CAGI Standard ADF 200 for Desiccant Compressed Air Dryer. Rating conditions are 100°F (37.8°C) inlet 100 psig (6.7 barg) inlet pressure, 100% relative humidity, 100°F (37.8°C) ambient temperature, and 5 psi (0.35 bar) pressure drop.
* Consult factory for larger models.

Features

Deltech RP Series dryers will produce the design dew point while operating continuously at maximum rated flow (100% duty cycle) at CAGI ADF 200 inlet standards of 100°F inlet temperature and 100% relative humidity at 100 psig.

Standard RP Series (Heated Blower Purge) Desiccant Compressed Air Dryers: -4°F to -40°F Pressure Dew Points
Designed for applications that were previously forced to accept a 40°F pressure dew point when simple protection against seasonal freezing is the issue. The standard design delivers ISO 8573.1 dew points between Class 2 and Class 3 automatically. Class 2 (40°F) dew points protect against freezing during low ambient conditions and Class 3 (4°F) dew points keep your air system bone dry during the heat of summer. Applications that require Class 2 (-40°F) dew points year round simply need to select the Free-Air (FA) Supercharger option package

Energy Management System
The EMS uses rugged temperature- & humidity-sensing technology that does not require calibration. Constant desiccant bed monitoring ensures stable dew point control. Algorithm-based A3 PurgeTechnology™ controls precisely engage the FA Supercharger when needed to manage the bed regeneration cycles and boost the airflow through the tower. Compressed purge air volume is reduced, further optimizing energy conservation.

An RP Series dryer with an EMS package may enable the use of a smaller air compressor. Total system efficiency would then be superior due to the linear energy-saving potential of the dryer. Purge air savings of up to 15% are possible in direct proportion to demand when compared to typical heatless designs. Consistent -40°F pressure dew points and fast returns-on-investment are automatic year round.

Specifications

MODELINLET FLOW
@ 100 PSI
(6.7 BARG)
HEATER
RATED
OUTPUT
FULL LOAD
(AVERAGE)
INLET/OUTLET
CONNECTIONS
HF SERIES
PREFILTER
HTA SERIES
AFTERFILTER
SCFMNM3/HKWKWIN(RECOMMENDED)
HPD3003005104.52.01 1/2" NPTHF-36-12-DGLHTA400
HPD4004006806.02.71 1/2" NPTHF5-40-16-DGHTA400
HPD5005008507.03.32" NPTHF5-44-20-DGHTA600
HBP6006001,0198.04.02" NPTHF5-44-20-DGHTA600
HBP7507501,27410.05.03" FLGHF5-48-20-DGHTA1200
HBP9009001,52912.06.03" FLGHF5-54-24-GHTA1200
HBP105010501,78414.07.03" FLGHF5-56-24-GHTA1200
HBP130013002,20917.08.73" FLGHF5-60-24-GHTA1800
HBP150015002,54919.010.03" FLGHF5-60-24-GHTA1800
HBP180018003,05823.012.03" FLGHF5-60-24-GHTA1800
HBP220022003,73828.014.74" FLGHF5-64-4F-GHTA2400
HBP260026004,41733.017.44" FLGHF5-68-4F-GHTA3000
HBP320032005,43740.021.44" FLGHF5-72-6F-GHTA4800

1 Performance data per CAGI Standard ADF 200 for Desiccant Compressed Air Dryer. Rating conditions are 100°F (37.8°C) inlet 100 psig (6.7 barg) inlet pressure, 100% relative humidity, 100°F (37.8°C) ambient temperature, and 5 psi (0.35 bar) pressure drop.
* Consult factory for larger models.